Time Runner is a pattern generator that can also be used as a rhythm divider. The clock signal can come from the built-in oscillator or from the external source. This signal is fed to four channels, which divide by 2, 4, 8 and 16. Each channel has two...
Game system is a sequencer of CV and gate signals with control via joystick and buttons. The module contains six pre-installed "games", each of which contains an individual type of sequencing: from a standard step sequencer to a chaotic set of CV and...
The case of Buchla format for desktop use. It can accommodate LEM3, LEM4, LEM7 or any other set of 200/200e series modules. An external switched mode power supply is used, which comes with a set of adapters for different types of networks (USA, Japan, Europe).
Lower or upper part for building up an 18 panel system 200e. It does not have its own power supply, therefore it is necessary to connect it to the "active housing" (201e-6 Powered Boat) to make the modules operate.
Torcido is a digital stereo distortion processor of the AIRA line. Like all representatives of the AIRA series, Torcido is Eurorack mountable and can be used as a desktop module. Five controllers are provided for setting the processor: volume, tone,...
Two independent filters are placed in one 521 module. A voltage controlled filter can serve not only for signal frequency correction, but also for obtaining various "wobble", "quacks" and so on. Each of the filters has three inputs for signals with...
SYSTEM-500 530 DUAL VCA - two Voltage Controlled Amplifiers in one housing. In fact the unit represents two three-channel mixers. The control of the input signal level is carried out with small faders. With the same faders, the mixing of the control...
The analog module 540 of the new System-500 comprises two independent envelope generator units and one low frequency oscillator unit. The envelope generator provides control of ADSR parameters (attack, decay, sustain, release) - this allows receiving...
The module 572 combines three independent blocks - Delay, Phaser and Low Frequency Oscillator. The five-stage phaser has frequency and resonance tuning. There are two inputs for external control signals (CV), which can control the ratio of the dry signal...
Scatter + Looper = Scooper is a digital processor made by Roland. The module is designed for creating and processing loops in real time. Digital controllers have a resolution of 16 million values, which allows you to fine-tune all the effect parameters....
