The frequency shifter and balanced modulator are two independent functional units integrated in the Buchla 285e housing. Frequency Shifter is designed to shift the input signal to an arbitrary frequency. The offset frequency can be set from the internal...
1 399.00
225e is designed to convert MIDI commands into Buchla control signals (pulse voltage and CV). The outputs of the converter are combined into control buses. The first four buses (A-D) are internal and serve to control the modules 281e, 292e, 259e and...
1 399.00
At the top of 257e there are two CV processors. Functionally they are the same as in 256e with the only difference that they have one input and, accordingly, there is no CV mixer. It is possible to set the minimum and maximum value of the control signal,...
1 449.00
Buchla 251e is represented with four 50-step sequencers. Each of them has independent outputs (pulse and CV) and control inputs (start/stop). The parameters of each sequencer are programmed in series through the SEQ edit and STAGE edit. All the...
1 499.00
The Buchla 210e is designed for routing control signals and audio signals. The device allows you to reduce the number of patch cables, and the configured combinations of inputs and outputs can be saved in patches. Eight audio inputs can be assigned to...
1 499.00
