Pittsburgh Modular M3 Mult Audio and Control Voltage Signal Router 69.00 U.S.Dollars
Three convenient mini modules enclosed in one housing. In the upper part is a passive signal propagator. It is represented with four parallel connectors, which allow you to send one signal assigning it into three routings. In the middle and bottom part...
Dreadbox Mixer 3-9-Channel Mixer 75.00 U.S.Dollars
The Dreadbox Mixer is a 4-channel analog mixer designed for use with synthesizers, drum machines, and other electronic instruments. It features two stereo inputs, two mono inputs, and a master output. The mixer also includes a headphone output, a cue system, and a three-band EQ.
Behringer CAT Duophonic Analog Synthesizer Module 79.00 U.S.Dollars
Behringer CAT is an Eurorack-sized Semi-modular Analog Synth with 2 VCOs (saw, triangle, pulse with width), resonant low-pass filter, 4 mixable waveshapes, LFO, ADSR EG and AR transient generator, poly chain ability, MIDI In/Thru, USB-MIDI and CV inputs.
Mix Mult consists of two functional units: a three-channel mixer and two signal multipliers. Each mixer channel has its own gain control. Channels 1 and 2 have independent outputs with the function of disconnecting from the mixer, which allows them to be...
The four-channel mixer or 4 independent attenuators. Can be used for both audio signals and CV control signals. An independent level controller is provided for each channel. The circuit allows using any of the first three channels as an independent...
Dreadbox Drive Analog Drive 90.00 U.S.Dollars
The analog overdrive effect taken from Abyss synthesizer.
Pittsburgh Modular Outs Stereo Headphone Amp and Line Outs 99.00 U.S.Dollars
The module is designed as an "extreme" block of the modular system, its purpose is to output the generated synth sound. Outs has two independent inputs, which allows the module to be used not only as a stereo, but as a dual mono. If the signal cable is...
The two low-frequency oscillators are combined simultaneously within one housing, each having its own peculiarities. There’s LFO1 at the top of the module. The generation frequency is set by the large "frequency" knob and is indicated by a flashing red...
InOut is an I/O module for the modular system. In the upper part of the housing there is an output unit. It has two 1/8" inputs and an adjustable 1/4" output jack. This sub-unit can serve to match the output of the modular synthesizer with the line input...
Detect is a small module (6HP) designed to generate control signals from an audio signal. Two CV signals at the output of the block: ENV (envelope signal) and GATE (pulse waveform). For the envelope detector, attack and decay settings are available. The...