Analog Voltage Controlled Oscillator (VCO). Oscillator v1 can produce four sound waves within a five-octave range. Control is carried out according to the standard 1 Volt per octave. For each waveform (sine, triangle, saw, square) an individual output is...
Voltage Influenced LFO is a unique module in the world of modular systems. This is a very unusual low frequency oscillator. The module has two outputs: "TRI" is a triangular wave (basic for the module)."VAR" is a variable wave that goes from the triangle...
Analog delay module, built on two chips 4096 BBD (Bucket Brigade Delay line). It is the predecessor of Analog Replicator. Rate sets the delay time, FBK - the feedback intensity, DRY - the volume of the original signal at the output, WET - the value...
Waveforms Oscillator is the analog oscillator (VCO) with multiple outputs and the possibility of modulation. Waveforms is designed to work with 1V/octave signals, and notes can be played within five octaves. Unlike vintage VCO, the module has good...
Verbtronic is a digital mono echo effect. It has two modes of operation: "verb" and "tronic". Verb creates a short echo with a small number of reflections. Tronic is a specific long soaring echo effect. The "tonal tilt" control is a kind of equalizer...
The module consists of three independent function blocks: Glide - the limiter (or portamento, or lag-processor). The "TIME" knob adjusts the rise time of the signal.Sample & hold - contains an analog noise generator and a sample&hold circuit. The...
Time Runner is a pattern generator that can also be used as a rhythm divider. The clock signal can come from the built-in oscillator or from the external source. This signal is fed to four channels, which divide by 2, 4, 8 and 16. Each channel has two...
Synthesizer Box is a semi-modular analog synthesizer in the Eurorack format. It is very suitable as the prime modular synthesizer: all basic connections are already routed – “plug and play” kind of thing. All the main function blocks have their...
The module is designed for routing and mixing audio and/or control signals. Each of the four channels can be manually switched by the on/off switch or by the control signal received by the Gate In. The signal sent to the input can be sent to bus A and/or...
The sequencer can play sequences of 4, 6 or 8 steps (depends on the position of the switch). In order to move from step to step, the timing signal routed to the "CLK" input can be used. It can be a square wave or a gate signal. For the construction of...
